You are using an outdated browser. Please upgrade your browser to improve your experience.

Panasonic Toughbook® S1/L1 Tablet Cradle, No Electronics - Thin Model

Item #7160-1314-14

Angled view left-Panasonic S1 NO RF Cradle without computer Angled view left-Panasonic S1 NO RF Cradle without computer
Angled view left-Panasonic S1 NO RF Cradle without computer
Angled view left -Panasonic FZ-S1 NO RF THIN Dock with computer
Front view-Panasonic S1 NO RF Cradle without computer
Angled view right-Panasonic FZ-S1 NO RF Dock without computer
Angled view right-Panasonic S1 NO RF Cradle without computer
Angled view right-Panasonic Toughbook S1 NO RF Dock with computer
Right edge view - Panasonic FZ-S1 NO RF THIN DOCK with tablet in dock with hand strap attached.
Download
MSRP $0.00
Where to Buy
Product Sheet - Panasonic S1 L1 Tablet Docking Station Testing Summary Installation Guide - 901
View Full Line Catalog
Weight
Depth
Height
Width

1.3 lbs. / .58 kg

3.03 in / 7.69 cm

7.21 in / 18.31 cm

7.97 in / 20.24 cm

Weight

1.3 lbs. / .58 kg

Depth

3.03 in / 7.69 cm

Height

7.21 in / 18.31 cm

Width

7.97 in / 20.24 cm

Compatibility

Compatible with the Panasonic Toughbook L1 and S1 Tablet computer without RF Pass-Through and tablet hand strap.

This product is End of Life. For service support of an existing dock, please contact our Service Center.

This Panasonic Toughbook S1/L1 cradle is an economical way to hold and protect your L1 tablet while it is in your vehicle. The thin design of this Panasonic Toughbook L1 cradle will enable the tablet to be mounted close to the instrument panel and will still accommodate the tablet's large battery and bar code reader.

Antenna Pass-Through

  • None

Port Replication

  • No port replication

Power Supply

  • Not included - must use either:
    • External LIND power supply cigarette adapter (7300-0444) or
    • LIND bare wire power adapter (7300-0443) 

Features

  • Compatible with the Panasonic L1 and S1 Tablet computer
  • This cradle is designed to accommodate the L1/S1 tablet's large battery and bar code reader (sold separately)
  • Easy to use one-handed operation:
    • Insert bottom of computer into the cradle, push top of computer against latch button until latch engages
    • To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station
  • Access to all tablet control buttons and ports while tablet is cradled
  • Optional keyed lock for theft deterrence
  • VESA 75mm and AMPS mounting patterns
  • Rounded edges to enhance personal safety

Certificates & Testing

  • Panasonic Toughbook Certified
  • MIL-STD 810G Shock & Vibration Tested
  • Cycle Tested: Docking connector, latching and locking mechanisms. 30,000 cycles.
  • Environmental Testing: High/Low Temperature, Operational/Storage, Thermal Shock

Warranty

COMPATIBLE ACCESSORIES - GJ EXTENDED PRODUCT PORTFOLIO

Recommended Solutions

Related Products