You are using an outdated browser. Please upgrade your browser to improve your experience.

Panasonic Toughbook® S1/L1 Tablet Docking Station, No RF - Thin Model

Item #7160-1314-10

Angled view left-Panasonic S1 NO RF Cradle without computer Angled view left-Panasonic S1 NO RF Cradle without computer
Angled view left-Panasonic S1 NO RF Cradle without computer
Angled view left -Panasonic FZ-S1 NO RF THIN Dock with computer
Front view-Panasonic S1 NO RF Cradle without computer
Angled view right-Panasonic FZ-S1 NO RF Dock without computer
Angled view right-Panasonic S1 NO RF Cradle without computer
Angled view right-Panasonic Toughbook S1 NO RF Dock with computer
Right edge view - Panasonic FZ-S1 NO RF THIN DOCK with tablet in dock with hand strap attached.
Download
MSRP $0.00
Unavailable
Product Sheet - Panasonic S1 L1 Tablet Docking Station Installation Guide - 900 Testing Summary
View Full Line Catalog
Weight
Height
Width
Depth

1.4 lbs / .63 kg

7.21 in / 18.31 cm

7.97 in / 20.24 cm

3.03 in / 7.69 cm

Weight

1.4 lbs / .63 kg

Height

7.21 in / 18.31 cm

Width

7.97 in / 20.24 cm

Depth

3.03 in / 7.69 cm

Compatibility

Compatible with the Panasonic Toughbook L1 and S1 Tablet computer without RF Pass-Through and tablet hand strap.

This product is End of Life. For service support of an existing dock, please contact our Service Center.

The thin design of this Panasonic Toughbook S1/L1 docking station will enable the dock to be mounted close to the instrument panel and will still accommodate the tablet's large battery and barcode reader. If you will not require antenna pass-through and will not need the tablet's rotating hand strap then this is the docking station for you.

Antenna Pass-Through

  • None

Port Replication

  • Power supply input DC 5V 1.8A
  • USB 2.0 500mA
  • External antenna select switch

Power Supply

  • Not included - must use either:
    • External LIND power supply cigarette adapter (7300-0444) or
    • LIND bare wire power adapter (7300-0443) 

Features

  • Compatible with the Panasonic L1 and S1 Tablet computer
  • This docking station is designed to accommodate the L1/S1 tablet's large battery and bar code reader (sold separately)
  • Easy to use one-handed operation:
    • Insert bottom of computer into the docking station, push top of computer against latch button until latch engages
    • To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station
  • Access to all tablet control buttons and ports while tablet is docked
  • Optional keyed lock for theft deterrence
  • Rear-facing I/O ports; integrated cable restraint and cable management system
  • VESA 75mm and AMPS mounting patterns
  • Rounded edges to enhance personal safety

Testing & Certificates

  • Panasonic Toughbook Certified
  • MIL-STD 810G Shock & Vibration Tested
  • Cycle Tested: Docking connector, latching and locking mechanisms. 30,000 cycles.
  • Environmental Testing: High/Low Temperature, Operational/Storage, Thermal Shock

Warranty

COMPATIBLE ACCESSORIES - GJ EXTENDED PRODUCT PORTFOLIO

Recommended Solutions

Related Products